| View previous topic :: View next topic |
| Author |
Message |
RMBowden
Joined: 11 Mar 2006
Posts: 2
|
 Posted: Sat Mar 11, 2006 1:59 pm Post subject: Upgrade from 1.8.6 to 3.2.0 |
 |
|
I have been running version 1.8.6 on a Buffalo Technologies Linkstation NAS (an imbeded PPC 603e CPU) hacked to run Gentoo Linux. Other than a problem with compatiblity with existing *.wlk files (likely and endian issue) everything was working.
I have been attempting to upgrade to 3.2.0. Everything compiles and configures as expected but startup fails. The log message is:
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637319> : radlib: wviewd started as a daemon ...
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637328> : wview 3.2.0 starting ...
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637331> : station interface: ethernet ...
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637332> : Rain Season Start Month set to 1
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637334> : Rain Storm Start Trigger set to 0.05 in/hr
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637335> : Rain Storm Stop Time set to 12 hours
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637336> : station polling interval set to 15 seconds
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637337> : radMsgRouterInit: radmrouted not running!
Mar 11 14:06:10 LinkPower wviewd[12266]: <3937637338> : radMsgRouterInit failed!
Mar 11 14:06:11 LinkPower htmlgend[12269]: <3937638338> : wview daemon lock file /var/wview/wviewd.pid does not exist - aborting!
Mar 11 14:06:11 LinkPower htmlgend[12269]: <3937638342> : system init failed!
Obviously there is a problem with the radlib. I have the latest 2.6.2 installed.
Ideas?
TIA
- Bob |
|
| Back to top |
|
 |
mteel
Joined: 30 Jun 2005
Posts: 435
Location: Collinsville, TX
|
| Posted: Sun Mar 12, 2006 6:34 am Post subject: |
|
|
The wview start script changed between your old version and 3.2.0 - changed so it starts radmrouted. Copy whichever flavor of start script you used for gentoo (examples/FreeBSD or FedoraCore or Debian) to your start script location.
These kinds of upgrade issues are normally addressed in the release notes entries since your old version and/or the UPGRADE file.
FYI, the new endian conversion utilities included in the 3.2.0 release should help you out in moving your old WLK files to the PPC big endian platform.
HTH,
Mark |
|
| Back to top |
|
|
RMBowden
Joined: 11 Mar 2006
Posts: 2
|
| Posted: Mon Mar 13, 2006 1:16 pm Post subject: |
|
|
That was it. Somehow I didn't update the startup script and was running the old 1.8.6 script.
The endian utilities solves the *.wlk file issue.
Thanks for the help
- Bob |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
