| View previous topic :: View next topic |
| Author |
Message |
wmiler
Joined: 21 Jul 2005
Posts: 24
Location: Florida
|
 Posted: Tue Nov 08, 2005 4:45 pm Post subject: Lightning Detection |
 |
|
I suppose this should prolly go in the section 'Things that should be done in another program', but I'll try here first 
I have a Boltek LD-250 detector which I currently have running via Virtual PC on my mac that's also running wview. Since the Boltek basically just streams an ASCII sequence I would think there's some fairly straight forward way to display the info. As a quick trial, I made use of the Generic Mapping Tools (GMT) that could easily display the output from the detector. It's been a long time since I've programmed I/O on any platform tho, so that's about s far as I got. |
|
| Back to top |
|
 |
mteel
Joined: 30 Jun 2005
Posts: 435
Location: Collinsville, TX
|
| Posted: Thu Nov 10, 2005 5:55 am Post subject: |
|
|
| I would need one in order to reverse engineer the protocol even if you can come up with a protocol spec. And I would need to know that this is a common device that will be around for some time and others would be interested in using. Otherwise I don't know what to tell you... |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
