| View previous topic :: View next topic |
| Author |
Message |
sly
Joined: 15 Oct 2006
Posts: 4
|
 Posted: Sun Oct 15, 2006 7:22 pm Post subject: ftp upload partly fails and current data is missing |
 |
|
hi all! we spent a couple of hours installing wview on a NSLU device... so far so good... but now we stumbled over "non-NSLU"/general issues:
- wviewftpd daemon problem:
the wviewftpd daemon is trying to upload the generated content of "/var/wview/img" but unfortunately there's the error-message "No such file or directory" appearing in the log-file (for each file within the directory)... the files were prepared by the html generator daemon and can be uploaded manally without any troubles.... why does the wviewftpd deamon fail?
- the values and generated charts of the latest 24h are missing:
all values of the "current conditions" are completly wrong (all temp related values are set to -17.8°C and the others are set to 0) and the part of the latest 24h is missing in every chart while the older data (older than 24h) is shown and seems to be correct.... where is the data of the latest 24h?
I'm looking forward to any hints 
thanks, sly |
|
| Back to top |
|
 |
bhnb
Joined: 28 Nov 2005
Posts: 127
|
| Posted: Mon Oct 23, 2006 1:50 pm Post subject: |
|
|
Hi sly
Are you using the tnftp client as specified in the wview manual?
For the other problem, I've also had this a couple of times on startup but it is usually fixed by a restart, and the bad values haven't been stored permanently.
Jon |
|
| Back to top |
|
|
sly
Joined: 15 Oct 2006
Posts: 4
|
| Posted: Wed Oct 25, 2006 4:10 pm Post subject: |
|
|
me again!
I could fix the problem in the meantime by running "vpinstall" a 2nd time...
thanks! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
