wviewweather.com Forum Index wviewweather.com
wview and Weather Topics
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

HTMLgend does not generate images after Upgrade

 
Post new topic   Reply to topic    wviewweather.com Forum Index -> Troubleshooting
View previous topic :: View next topic  
Author Message
kevork



Joined: 10 Oct 2005
Posts: 7

PostPosted: Sat Feb 25, 2006 11:49 pm    Post subject: HTMLgend does not generate images after Upgrade Reply with quote

Hi all !,

After upgrading wview from 1.8.1 to 3.1.0, I have no new images after wview get new data and htmlgend runs ....


Log looks like this:

Feb 26 02:20:04 campo htmlgend[4474]: <2764870908> : Adding 5 minute sample...
Feb 26 02:20:10 campo htmlgend[4474]: <2764876886> : Generated: 73 ms: 0 images, 6 html/xml files
Feb 26 02:21:10 campo htmlgend[4474]: <2764936885> : Generated: 72 ms: 0 images, 6 html/xml files
Feb 26 02:22:10 campo htmlgend[4474]: <2764996885> : Generated: 72 ms: 0 images, 6 html/xml files
Feb 26 02:23:10 campo htmlgend[4474]: <2765056885> : Generated: 72 ms: 0 images, 6 html/xml files
Feb 26 02:24:10 campo htmlgend[4474]: <2765116885> : Generated: 72 ms: 0 images, 6 html/xml files


BUT, if at any time, I send signal HUP to htmlgend, images begins to be generated, for some time ...

Feb 26 02:35:04 campo htmlgend[4474]: <2765770910> : Adding 5 minute sample...
Feb 26 02:35:11 campo htmlgend[4474]: <2765777758> : Generated: 945 ms: 34 images, 6 html/xml files
Feb 26 02:36:10 campo htmlgend[4474]: <2765837280> : Generated: 467 ms: 17 images, 6 html/xml files
Feb 26 02:37:10 campo htmlgend[4474]: <2765897279> : Generated: 466 ms: 17 images, 6 html/xml files
Feb 26 02:38:10 campo htmlgend[4474]: <2765957279> : Generated: 466 ms: 17 images, 6 html/xml files


Configuration is the same as before upgrading.

Would some one give some idea about this ? ...

Thanks !.
Back to top
View user's profile Send private message
bhnb



Joined: 28 Nov 2005
Posts: 127

PostPosted: Sun Feb 26, 2006 11:09 am    Post subject: Reply with quote

Hi

This might be irrelevant, but did you also do the necessary radlib upgrade?

Jon
Back to top
View user's profile Send private message
kevork



Joined: 10 Oct 2005
Posts: 7

PostPosted: Sun Feb 26, 2006 5:08 pm    Post subject: radlib upgrade Reply with quote

Hi Jon ...

Yes, I did.
Back to top
View user's profile Send private message
bhnb



Joined: 28 Nov 2005
Posts: 127

PostPosted: Tue Feb 28, 2006 7:48 am    Post subject: Reply with quote

Could you post a bit more of the startup log? I'm wondering if htmlgend gets the correct number of images to generate but doesn't do them, or if it gets no images and therefore thinks it doesn't need to do any. Here's an example from my system:

Feb 28 13:02:17 (none) user.info htmlgend[1155]: <2965404469> : htmlmgrInit: 43 built-in image definitions added
Feb 28 13:02:17 (none) user.info htmlgend[1155]: <2965404470> : htmlmgrInit: 0 user image definitions added
Feb 28 13:02:17 (none) user.info htmlgend[1155]: <2965404472> : htmlmgrInit: 7 html/xml templates added
Back to top
View user's profile Send private message
kevork



Joined: 10 Oct 2005
Posts: 7

PostPosted: Tue Feb 28, 2006 9:00 am    Post subject: More from LOG ... Reply with quote

Jon, here goes log from wview startup ... I think the red lines what may indicate something, but I don't see where to look for from, the config is the same as before upgrading ....


Thank you !,
Jorge.

Feb 28 11:52:29 campo radmrouted[8505]: <2972015962> : radlib: radmrouted started as a daemon ...
Feb 28 11:52:29 campo radmrouted[8505]: <2972015965> : started on radlib system 1, workdir /var/wview
Feb 28 11:52:29 campo radmrouted[8505]: <2972015965> : running...
Feb 28 11:52:30 campo wviewd[8509]: <2972017017> : radlib: wviewd started as a daemon ...
Feb 28 11:52:30 campo wviewd[8509]: <2972017025> : wview 3.1.0 starting ...
Feb 28 11:52:30 campo wviewd[8509]: <2972017029> : station interface: serial ...
Feb 28 11:52:30 campo wviewd[8509]: <2972017030> : Rain Season Start Month set to 1
Feb 28 11:52:30 campo wviewd[8509]: <2972017031> : Rain Storm Start Trigger set to 0.05 in/hr
Feb 28 11:52:30 campo wviewd[8509]: <2972017032> : Rain Storm Stop Time set to 12 hours
Feb 28 11:52:30 campo wviewd[8509]: <2972017033> : station polling interval set to 30 seconds
Feb 28 11:52:30 campo wviewd[8509]: <2972017066> : -- Station Init Start --
Feb 28 11:52:31 campo wvalarmd[8515]: <2972018069> : /etc/wview/wvalarm.conf does not exist - exiting...
Feb 28 11:52:31 campo htmlgend[8513]: <2972018094> : radlib: htmlgend started as a daemon ...
Feb 28 11:52:31 campo wviewd[8509]: <2972018097> : Vantage Pro on /dev/ttyS0 opened ...
Feb 28 11:52:31 campo htmlgend[8513]: <2972018115> : !! configured for metric units/conversion !!
Feb 28 11:52:31 campo htmlgend[8513]: <2972018116> : !! Rain units will be mm !!
Feb 28 11:52:31 campo htmlgend[8513]: <2972018117> : generating to /var/wview/img
Feb 28 11:52:31 campo wvcwopd[8516]: <2972018126> : /etc/wview/wvcwop.conf does not exist - exiting...
Feb 28 11:52:31 campo wviewd[8509]: <2972018141> : station archive interval: 5 minutes
Feb 28 11:52:31 campo wviewd[8509]: <2972018158> : running...
Feb 28 11:52:31 campo wviewftpd[8517]: <2972018164> : /etc/wview/wviewftp.conf does not exist - exiting...
Feb 28 11:52:31 campo wviewsshd[8518]: <2972018190> : /etc/wview/wviewssh.conf does not exist - exiting...
Feb 28 11:52:31 campo wviewd[8509]: <2972018450> : station location: elevation: 0 feet
Feb 28 11:52:31 campo wviewd[8509]: <2972018450> : station location: latitude: 34.2 S longitude: 59.0 W
Feb 28 11:52:31 campo wviewd[8509]: <2972018450> : initializing computed data values...
Feb 28 11:52:32 campo htmlgend[8513]: <2972018650> : running...
Feb 28 11:52:34 campo wviewd[8509]: <2972021146> : -- Station Init Complete --
Feb 28 11:52:34 campo wviewd[8509]: <2972021155> : newest archive record: 2006-02-28 11:50
Feb 28 11:52:34 campo htmlgend[8513]: <2972021157> : received archive path /var/wview/archive from wviewd: 20060228 11:52:34
Feb 28 11:52:34 campo htmlgend[8513]: <2972021161> : htmlmgrInit: /etc/wview/images-metric-mm.conf does not exist!

Feb 28 11:52:34 campo htmlgend[8513]: <2972021161> : htmlmgrInit: 0 built-in image definitions added
Feb 28 11:52:34 campo htmlgend[8513]: <2972021162> : htmlmgrInit: 0 user image definitions added

Feb 28 11:52:34 campo htmlgend[8513]: <2972021163> : htmlmgrInit: 6 html/xml templates added
Feb 28 11:52:34 campo htmlgend[8513]: <2972021163> : htmlmgrInit: forecast html tags are disabled - /etc/wview/forecast.conf not found...
Feb 28 11:52:35 campo htmlgend[8513]: <2972022544> : ARCREC: using header file /etc/wview/arcrec-header.conf ...
Feb 28 11:52:35 campo htmlgend[8513]: <2972022546> : ARCREC: saving ALL daily archive reports ...
Feb 28 11:52:37 campo htmlgend[8513]: <2972024409> : ARCREC: 143 daily archive reports available
Feb 28 11:52:38 campo htmlgend[8513]: <2972024560> : starting html generation in 2 mins 32 secs
Feb 28 11:52:38 campo htmlgend[8513]: <2972024561> : doing initial html generation now...
Feb 28 11:52:38 campo htmlgend[8513]: <2972024638> : Generated: 76 ms: 0 images, 6 html/xml files
Back to top
View user's profile Send private message
mteel



Joined: 30 Jun 2005
Posts: 435
Location: Collinsville, TX

PostPosted: Tue Feb 28, 2006 9:34 pm    Post subject: Reply with quote

Quote:
Feb 28 11:52:34 campo htmlgend[8513]: <2972021161> : htmlmgrInit: /etc/wview/images-metric-mm.conf does not exist!
Feb 28 11:52:34 campo htmlgend[8513]: <2972021161> : htmlmgrInit: 0 built-in image definitions added
Feb 28 11:52:34 campo htmlgend[8513]: <2972021162> : htmlmgrInit: 0 user image definitions added


This implies you have set the configuration value in htmlgen.conf for rain in millimeters, but have not copied the file images-metric-mm.conf from the distro (examples/conf) to your /etc/wview directory (as described in the UPGRADE file).

HTH,
Mark
Back to top
View user's profile Send private message Send e-mail Visit poster's website
kevork



Joined: 10 Oct 2005
Posts: 7

PostPosted: Tue Feb 28, 2006 10:27 pm    Post subject: Reply with quote

That's it !!.
Thank you for the advise !.

Jorge.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    wviewweather.com Forum Index -> Troubleshooting All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group